Back to Metallurgy

Set 6 of 8 · Questions 151-180 of 225

In the print window choose “Save as PDF”. The file prints without a web address or date line.

Mere Teacher

Mere Teacher · Previous Year Questions

JEE Main Chemistry · Metallurgy · Set 6 (Q151-180)

QR code to mereteacher.com

Scan or visit mereteacher.com for free PYQ practice, timed CBT tests, step-by-step solutions and BroBot AI. Answers and solutions are free with a sign-up.

  1. 151.
    Oxidation state of copper is +1 in
    1. (1)malachite
    2. (2)cuprite
    3. (3)azurite
    4. (4)none of the above
  2. 152.
    The one that is not a carbonate ore is:
    1. (1)malachite
    2. (2)calamine
    3. (3)siderite
    4. (4)bauxite
  3. 153.
    In the electrolytic refining of zinc,
    1. (1)graphite is at the anode
    2. (2)the impure metal is at the cathode
    3. (3)the metal ion gets reduced at the anode
    4. (4)acidified zinc sulphate is the electrolyte.
  4. 154.
    The correct statement is:
    1. (1)aniline is a froth stabilizer.
    2. (2)zincite is a carbonate ore
    3. (3)sodium cyanide cannot be used in the metallurgy of silver.
    4. (4)zone refining process is used for the refining of titanium.
  5. 155.
    Aluminium is extracted from alumina (Al2O3) by electrolysis of a molten mixture of :
    1. (1)Al2O3 + HF + NaAlF4
    2. (2)Al2O3 + CaF2 + NaAlF4
    3. (3)Al2O3 + Na3AlF6 + CaF2
    4. (4)Al2O3 + KF + Na3AlF6
  6. 156.
    In the extraction of copper from its sulphide ore, metal is finally obtained by the oxidation of cuprous sulphide with :
    1. (1)
    2. (2)
    3. (3)O
    4. (4)CO
  7. 157.
    Boron and silicon of very high purity can be obtained through
    1. (1)vapour phase refining
    2. (2)electrolytic refining
    3. (3)liquation
    4. (4)zone refining
  8. 158.
    In the extraction of copper from its sulphide ore, the metal is finally obtained by the reduction of cuprous oxide with
    1. (1)carbon monoxide
    2. (2)copper (I) sulphide
    3. (3)sulphur dioxide
    4. (4)iron (II) sulphide.
  9. 159.
    During the process of electro-refining of copper some metals present as impurity settle as anode mud. These are :
    1. (1)Sn and Ag
    2. (2)Pb and Zn
    3. (3)Ag and Au
    4. (4)Fe and Ni
  10. 160.
    Calamine and Malachite, respectively, are the ores of :
    1. (1)Nickel and Aluminium
    2. (2)Zinc and Copper
    3. (3)Copper and Iron
    4. (4)Aluminium and Zinc
  11. 161.
    The metal that can be purified economically by fractional distillation method is:
    1. (1)Fe
    2. (2)Zn
    3. (3)Cu
    4. (4)Ni
  12. 162.
    Which of the following pairs of metals is purified by van Arkel method ?
    1. (1)Ga and Ιn
    2. (2)Zr and Ti
    3. (3)Ag and Au
    4. (4)Ni and Fe
  13. 163.
    Which ofthe following pairs ofmetals is purified by van Arkel method?
    1. (1)Ga and In
    2. (2)Zr and Ti
    3. (3)Ag and Au
    4. (4)Ni and Fe(2011)
  14. 164.
    Given below are two statements :
    Statement I : According to the Ellingham diagram, any metal oxide with higher is more stable than the one with lower .
    Statement II : The metal involved in the formation of oxide placed lower in the Ellingham diagram can reduce the oxide of a metal placed higher in the diagram. In the light of the above statements, choose the most appropriate answer from the options given below:
    1. (1)Both Statement I and Statement II are correct.
    2. (2)Both Statement I and Statement II are incorrect
    3. (3)Statement I is correct but Statement II is incorrect.
    4. (4)Statement I is incorrect but Statement II is correct.
  15. 165.
    Which one of the following is a mineral of iron?
    1. (1)Malachite
    2. (2)Cassiterite
    3. (3)Pyrolusite
    4. (4)Magnetite(2012)
  16. 166.
    Which one is malachite from the following
    1. (1).Cu
    2. (2)
    3. (3)Cu
    4. (4)
  17. 167.
    Which one of the following statements is incorrect ?
    1. (1)Boron and Indium can be purified by zone refining method.
    2. (2)Van- Arkel method is used to purify tungsten.
    3. (3)Cast iron is obtained by melting pig iron with scrap iron and coke using hot air blast.
    4. (4)The malleable iron is prepared from cast iron by oxidising impurities in a reverberatory furnace.
  18. 168.
    The major components in "Gun Metal" are:
    1. (1)Al, Cu, Mg and Mn
    2. (2)Cu, Sn and Zn
    3. (3)Cu, Zn and Ni
    4. (4)Cu, Ni and Fe
  19. 169.
    The method of zone refining of metals is based on the principle of
    1. (1)greater mobility of the pure metal than that of the impurity
    2. (2)higher melting point of the impurity than that of the pure metal
    3. (3)greater noble character of the solid metal than that of the impurity
    4. (4)greater solubility of the impurity in the molten state than in the solid.
  20. 170.
    The following reactions take place in the blast furnace in the preparation of impure iron. Identify the reaction pertaining to the formation of the slag.
    1. (1)
    2. (2)
    3. (3)
    4. (4) (Mains2011)
  21. 171.
    The element that can be refined by distillation is
    1. (1)gallium
    2. (2)nickel
    3. (3)zinc
    4. (4)tin
  22. 172.
    Which of the reaction is suitable for concentrating ore by leaching process ?
    1. (1)S + O +
    2. (2) + CO 3FeO +
    3. (3) + 2NaOH + O 2Na[A1
    4. (4) + 6Mg 6MgO + 4A1
  23. 173.
    The method used for the purification of Indium is :
    1. (1)van Arkel method
    2. (2)vapour phase refining
    3. (3)zone refining
    4. (4)Liquation
  24. 174.
    The metal that is not extracted from its sulphide ore is :
    1. (1)Aluminium
    2. (2)Iron
    3. (3)Lead
    4. (4)Zinc
  25. 175.
    Which of the following taking place in the Blast furnace is endothermic?
    1. (1)
    2. (2)
    3. (3)
    4. (4)
  26. 176.
    The metal purified by Mond process is and metal purified by van Arkel method is . and respectively are
    1. (1)
    2. (2)
    3. (3)
    4. (4)
  27. 177.
    In the extraction of copper from its sulphide ore, the metal is formed by reduction of Cu2O with
    1. (1)FeS
    2. (2)CO
    3. (3)Cu2S
    4. (4)SO2
  28. 178.
    According to the following diagram, A reduces when the temperature is :
    1. (1)< 1200ºC
    2. (2)> 1200ºC but < 1400ºC
    3. (3)< 1400ºC
    4. (4)> 1400ºC
  29. 179.
    Heating mixture of Cu2O and Cu2S will give :
    1. (1)Cu2SO3
    2. (2)CuO + CuS
    3. (3)Cu + SO3
    4. (4)Cu + SO2
  30. 180.
    In the electrolytic refining of blister copper, the total number of main impurities, from the following, removedas anode mud is ____
    Pb, Sb, Se,Te,Ru,Ag,Au and Pt