1.The equivalent conductance of M/32 solution of a weak monobasic acid is 8.0 mho cm2 and at infinite dilution is 400 mhoscm2. The dissociation constant of this acid is- (1)1.25×10−6
- (2)6.25×10−4
- (3)1.25×10−4
- (4)1.25×10−5
2.Which out of the following is a correct equation to show change in molar conductivity with respect to concentration for a weak electrolyte, if the symbols carry their usual meaning :- (1)Λm−Λm0+AC21=0
- (2)Λm2C−KaΛm∘2+KaΛmΛm=0
- (3)Λm2mC+KaΛm∘2−KaΛmΛm∘=0
- (4)Λm−Λm∘−AC21=0
3.If the resistance of 0.1MKCl solution in a conductance cell is 300Ω and conductivity is 0.013Scm−1, then the value of cell constant is- (1)3.9cm−1
- (2)39m−1
- (3)3.9m−1
- (4)0.39cm−1
4.The anodic half-cell of lead-acid battery is recharged using electricity of 0.05 Faraday. The amount of PbSO4 electrolyzed in g during the process is: (Molar mass of PbSO4=303gmol−1)- (1)22.8
- (2)15.2
- (3)7.6
- (4)11.4
5.Based on the data given below: ECr2O72−/Cr3+∘=1.33VECl2/Cl(−)∘=1.36VEMnO4−/Mn2+∘=1.51VECr3+/Cr∘=−0.74V the strongest reducing agent is:- (1)Cr
- (2)Cl−
- (3)MnO4−
- (4)Mn2+
6.In the electrolysis of acidulated water, it is desired to obtain 1.12cc of hydrogen per second under S.T.P. condition. The current to be passed is- (1)9.65A
- (2)19.3A
- (3)0.965A
- (4)1.93A
7.The standard emf of galvanic cell involving 3 moles of electrons in its redox reaction is 0.59V. The equilibrium constant for the reaction of the cell is- (1)1025
- (2)1020
- (3)1015
- (4)1030
8.Two electrolytic cells are connected in series containing CuSO4 solution and molten AlCl3. If in electrolysis 0.4 moles of 'Cu' are deposited on cathode of first cell, the number of moles of 'Al' deposited on cathode of the second cell is- (1)0.6 moles
- (2)0.27 moles
- (3)0.18 moles
- (4)0.4 moles.
9.Molar ionic conductivities of divalent cation and anion are 57Scm2mol−1 and 73Scm2mol−1 respectively. The molar conductivity of solution of an electrolyte with the above cation and anion will be :- (1)187Scm2mol−1
- (2)260Scm2mol−1
- (3)130Scm2mol−1
- (4)65Scm2mol−1
10.An increase in equivalent conductance of a strong electrolyte with dilution is mainly due to- (1)increase in ionic mobility of ions
- (2)100% ionisation of electrolyte at normal dilution
- (3)increase in both i.e., number of ions and ionic mobility of ions
- (4)increase in number of ions.
11.Consider the following E∘ values EFe3+/Fe2+∘=0.77V ESn2+/Sn∘=−0.14V Under standard conditions the potential for the reaction Sn(s)+2Fe3+(aq)⟶2Fe2+(aq)+Sn2+(aq) is- (1)1.68 V
- (2)1.40 V
- (3)0.91 V
- (4)0.63 V
12.Which among the following equations represents the reduction reaction taking place in lead accumulator at positive electrode, while it is being used as a source of electrical energy?- (1)Pb→Pb2+
- (2)Pb4+→Pb
- (3)Pb2+→Pb
- (4)Pb4+→Pb2+
13.Consider the half‐cell reduction reactionMn2++2e−→Mn,Eo=−1.18VMn2+→Mn3++e−,Eo=−1.51V .The Eo for the reaction 3Mn2+→Mn0+2Mn3+, and possibility of the forward reaction are respectively- (1)−4.18V and yes
- (2)+0.33V and yes
- (3)+2.69V and no
- (4)−2.69V and no
14.The molar conductivity is maximum for the solution of concentration- (1)0.005M
- (2)0.004M
- (3)0.001M
- (4)0.002M.
15.In the cell represented by Pb(s)(Pb2+(1M))(Ag+(1M))Ag(s), the reducing agent is- (1)Pb
- (2)Pb2+
- (3)Ag
- (4)Ag+
16.Which among the following metals is employed to provide cathodic protection to iron?- (1)Zinc
- (2)Nickel
- (3)Tin
- (4)Lead
17.A metal plate of dimension of (1×2cm2) has to be coated on both the sides by Cu metal. How long does it take to deposit Cu of 0.01cm thickness, if 1.5A current is used? [Electrochemical equivalence of Cu is 0.0003g/C and the density of Cu is 9g/cm3 ]- (1)400s
- (2)800s
- (3)120s
- (4)160s
18.Consider the following reduction processes : Al3++3e−⟶Al(s),E0=−1.66VFe3++e−⟶Fe2+,E0=+0.77VCo3++e−⟶Co2+,E0=+1.81VCr3++3e−⟶Cr(s),E∘=−0.74VThe tendency to act as reducing agent decreases in the order :- (1)Al>Cr>Fe2+>Co2+
- (2)Cr>Fe2+>Al>Co2+
- (3)Al>Fe2+>Cr>Co2+
- (4)Al>Cr>Co2+>Fe2+
19.Calculate molar conductivity of NH4OH at infinite dilution if molar conductivities of Ba(OH)2, BaCl2 and NH4Cl at infinite dilution are 520,280, 129Ω−1cm2mol−1 respectively.- (1)249.0Ω-1 cm2 mol−1
- (2)498.0Ω-1 cm2 mol−1
- (3)125.0Ω-1 cm2 mol−1
- (4)369.0Ω-1 cm2 mol−1
20.On heating one end of a piece of a metal, the other end becomes hot because of- (1)energised electrons moving to the other end
- (2)minor perturbation in the energy of atoms
- (3)resistance of the metal
- (4)mobility of atoms in the metal.
21.If 5 ampers of current is passed for 193 seconds through a solution containing Copper salt, 0.32g of copper is deposited. What is the oxidation state of the Cu in the salt?- (1)+2
- (2)+1
- (3)+3
- (4)+23
22.When a quantity of electricity is passed through CuSO4 solution, 0.16g of copper gets deposited. If the same quantity of electricity is passed through acidulated water, then the volume of H2 liberated at STP will be [given : at. wt. of Cu=64]- (1)4.0cm3
- (2)56cm3
- (3)604cm3
- (4)8.0cm3
23.Limiting molar conductivity of Mg2+ and Cl−ions in water is 106.0 and 76.3Scm2mol−1. The limiting molar conductivity of magnesium chloride (in Scm2mol−1 ) in water is- (1)182.3
- (2)258.6
- (3)288.3
- (4)364.6
24.The metal that cannot be obtained by electrolysis of an aqueous solution of its salts is :- (1)Ag
- (2)Ca
- (3)Cu
- (4)Cr
25.Standard electrode potentials are Fe2+/Fe; Eo=−0.44 and Fe3+/Fe2+;Eo=0.77Fe2+,Fe3+and Fe blocks are kept together, then- (1)Fe3+ increases
- (2)Fe3+ decreases
- (3)Fe2+/Fe3+ remains unchanged
- (4)Fe2+ decreases.
26.Standard reduction potentials of the half reactions are given below: F2(g)+2e−→2F(−aq);Eo=+2.85V Cl2(g)+2e−→2Cl(−aq);Eo=+1.36V Br2(l)+2e−→2Br(−aq);Eo=+1.06V I2(s)+2e−→2I(−aq);Eo=+O.53V The strongest oxidising and reducing agents respectively are- (1)F2 and I−
- (2)Br2 and Cl−
- (3)Cl2 and Br−
- (4)Cl2 and I2
27.For a cell reaction involving a two electron change, the standard emf of the cell is found to be 0.295 V at 25°C. The equilibrium constant of the reaction at 25°C will be:- (1)1 × 10–10
- (2)29.5 × 10–2
- (3)10
- (4)1 × 1010
28.If the standard electrode potential for a cell is 2V at 300K the equilibrium constant (K) for the reaction Zn(s)+Cu2+(aq)⇌Zn2+(aq)+Cu(s) at 300K is approximately (R=8JK−1mol−1,F=96000Cmol−1)- (1)e−80
- (2)e−160
- (3)e320
- (4)e160
29.The metals that are employed in the battery industries are A. Fe B. Mn C. Ni D. Cr E. Cd Choose the correct answer from the options given below:- (1)B, C and E only
- (2)A, B, C, D and E
- (3)A, B, C and D only
- (4)B, D and E only
30.The efficiency of a fuel cell is given by- (1)ΔG/ΔS
- (2)ΔG/ΔH
- (3)ΔS/ΔG
- (4)ΔH/ΔG
|