1.Statement I: During Electrolytic refining, the pure metal is made to act as anode and its impure metallic form is used as cathode. Statement II: During the Hall-Heroult electrolysis process, purified A12O3 is mixed with Na3AlF6 to lower the melting point of the mixture. In the light of the above statements, choose the most appropriate answer from the options given below:- (1)Statement I is incorrect but Statement II is correct
- (2)Both Statement I and Statement II are incorrect
- (3)Statement I is correct but Statement II is incorrect
- (4)Both Statement I and Statement II are correct
2.4Ag(s)+8CN−(aq)+2H2O(aq)+O2(g)⟶4(Ag(CN)2)−(aq)+4−OH(aq) The above reaction represents the process of concentration of ore in the extraction of silver. This process is- (1)Leaching
- (2)Levigation
- (3)Froth floatation
- (4)Liquation
3.The process of zone refining is used in the purification of- (1)Al
- (2)Ge
- (3)Cu
- (4)Ag
4.The metal which is refined by Mond process is (X), by van Arkel process is (Y) and by zone refining is (Z). X,Y and Z respectively are- (1)Ni,Zr,Ga
- (2)Zr,Ni,Ga
- (3)Ga,Ni,Zr
- (4)Ni,Ga,Zr
5.Aluminium is extracted by the electrolysis of- (1)alumina
- (2)bauxite
- (3)molten cryolite
- (4)alumina mixed with molten cryolite
6.The major component of which of the following ore is sulphide based mineral?- (1)Calamine
- (2)Siderite
- (3)Sphalerite
- (4)Malachite
7.The correct statements regarding froth floatation method in metallurgy are I. Used for the purification of sulphide ores II. Used for the roasting of sulphide ores III. It is based on the relative densities of gangue and ore particles IV. It is based on the difference in the wetting properties of gangue and ore particles in frothing agent and water- (1)I & IV only
- (2)II & III only
- (3)II & IV only
- (4)I & III only
8.Which one of the following ores does not contain iron"- (1)Hematite
- (2)Magnetite
- (3)Calamine
- (4)Siderite
9.The ore which is purified by Leaching process is- (1)Zinc blende
- (2)Bauxite
- (3)Calamine
- (4)Haematite
10.Which one of the following ores is best concentrated by froth floatation method ?- (1)magnetite
- (2)cassiterite
- (3)galena
- (4)malachite.
11.When limestone is heated, CO2 is given off. The metallurgical operation is- (1)smelting
- (2)reduction
- (3)calcination
- (4)roasting.
12.The ore that contains both iron and copper is:- (1)copper pyrites
- (2)malachite
- (3)dolomite
- (4)azurite
13.Given below are two statements : Statement I: Sphalerite is a sulphide ore of zinc and copper glance is a sulphide ore of copper. Statement II: It is possible to separate two sulphide ores by adjusting proportion of oil to water or by using'depressants' in a froth flotation method. Choose the most appropriate answer from the options given below :- (1)Statement I is true but Statement II is false.
- (2)Both Statement I and Statement II are true.
- (3)Statement I is false but Statement II is true.
- (4)Both Statement I and are Statement II false.
14.The processes of calcination and roasting in metallurgical industries, respectively, can lead to- (1)Global warming and photochemical smog
- (2)Photochemical smog and ozone layer depletion
- (3)Photochemical smog and global warming
- (4)Global warming and acid rain
15.The chemical that is added to reduce themelting point of the reaction mixture during the extraction of aluminiumis :- (1)Cryolite
- (2)Bauxite
- (3)Calamine
- (4)Kaolite Official
16.The pair that does NOT require calcination is:- (1)ZnO and MgO
- (2)ZnO and Fe2O3⋅xH2O
- (3)ZnCO3 and CaO
- (4)Fe2O3 and CaCO3⋅MgCO3
17.In isolation of which one of the following metals from their ores, the use of cyanide salt is not commonly involved ?- (1)Zinc
- (2)Gold
- (3)Silver
- (4)Copper
18.The common impurity present in bauxite is- (1)CuO
- (2)ZnO
- (3)Fe2O3
- (4)Cr2O3
19.Match List I with List II. List I OreA. SideriteB. MalachiteC. SphaleriteD. CalamineList II CompositionI. Fe CO3II. CuCO3 .Cu (OH)2III. ZnSIV. ZnCO3 Choose the correct answer from the options given below:- (1)A-I,B-II,C-III,D-IV
- (2)A-III, B-IV, C-II, D-I
- (3)A-IV, B-III, C-I, D-II
- (4)A-I, B-II, C-IV, D-III
20.Which of the following elements is present as the impurity to the maximum extent in the pig iron ?- (1)Manganese
- (2)Carbon
- (3)Silicon
- (4)Phosphorus
21.Match the following List-I Refining Methods(A) Zone refining(B) Poling(C) Liquation(D) Vapor phaseList-II Metal to be refined(I) titanium(II) Tin(III)Gallium(IV) Copper refining The correct answer is- (1)A - IV, B - II, C - I, D - III
- (2)A - III, B - I, C - IV, D - II
- (3)A - III, B - IV, C - II, D - I
- (4)A - II, B - IV, C - I, D - III
22.Kernite and cryolite are the minerals of two elements X and Z. Respectively X and Z are- (1)B,Ga
- (2)B,Al
- (3)Al,In
- (4)B,Tl
23.Identify A and B respectively in the following reactions: 4Au(s)+8CN−(aq)+2H2O(aq) →O2(g)A(aq)+4OH−(aq)→Zn(s)B+2Au(s)- (1)(Au(CN)2)−;(Zn(CN)4)2−
- (2)Au(CN)4;(Zn(CN)4)2−
- (3)HCN;(Au(CN)4)2−
- (4)AuCN;[HCN]
24.Match List –I with List – II List I (Ore)(1) Kernite(2) Cassiterite(3) Calamine(4) CryoliteList II (Element Present)(i) Tin(ii) Boron(iii) Fluorine(iv) Zinc Choose the correct answer from the options given below:- (1)(1)-(ii), (2)-(iv), (3)-(i), (4)-(iii)
- (2)(1)-(ii), (2)-(i), (3)-(iv), (4)-(iii)
- (3)(1)-(i), (2)-(iii), (3)-(iv), (4)-(ii)
- (4)(1)-(iii), (2)-(i), (3)-(ii), (4)-(iv)
25.Function of potassium ethylxanthate in froth floatation process is to make the ore- (1)hydrophobic
- (2)hydrophilic
- (3)heavier
- (4)lighter.
26.The temperature of the slag zone in the metallurgy of iron using blast furnace is- (1)1500−1600∘C
- (2)400−700∘C
- (3)800−1000∘C
- (4)1200−1500∘C
27.Refining using liquation method is the most suitable for metals with :- (1)Low melting point
- (2)High boiling point
- (3)High electrical conductivity
- (4)Less tendency to be soluble in melts than impurities
28.Given below are two statements. Statement I: The choice of reducing agents for metals extraction can be made by using Ellingham diagram, aplot of ΔG vs temperature. Statement II: The value of ΔS increases from left to right in Ellingham diagram. In the light of the above statements, choose the most appropriate answer from the options given below:- (1)Both Statement I and Statement II are true
- (2)Statement I is false but Statement II is true
- (3)Both Statement I and Statement II are false
- (4)Statement I is true but Statement II is false
29.Cast iron is used for the manufacture of- (1)wrought iron, pig iron and steel
- (2)pig iron, scrap iron and steel
- (3)wrought iron and pig iron
- (4)wrought iron and steel
30.Sulphide ore on roasting gives a gas X.X reacts with Cl2 in the presence of activated charcoal to give Y. Y is- (1)S2Cl2
- (2)SCl6
- (3)SOCl2
- (4)SO2Cl2
|