In the print window choose “Save as PDF”. The file prints without a web address or date line.
Mere Teacher · Previous Year Questions
NEET Physics · Current Electricity · Set 11 (Q301-330)
Scan or visit mereteacher.com for free PYQ practice, timed CBT tests, step-by-step solutions and BroBot AI. Answers and solutions are free with a sign-up.
301.
A battery of 6V is connected to the circuit as shown below. The current I drawn from the battery is
(1)1A
(2)2A
(3)116 A
(4)34A
302.
A potentiometer wire has length 4 m and resistance 8 Ω. The resistance that must be connected in series with the wire and an accumulator of e.m.f. 2V, so as to get a potential gradient 1 mV per cm on the wire is
(1)44 Ω
(2)48 Ω
(3)32 Ω
(4)40 Ω
303.
In steady state, a capacitor of capacitance 2μF is charged to 4μC, as shown in figure. If the internal resistance of the cell is 0.5Ω, then the emf of the cell is
(1)4 V
(2)5 V
(3)2.5V
(4)2 V
304.
See the electrical circuit shown in this figure. Which of the following equations is a correct equation for it?
(1)ε1– (i1 + i2)R – i1r1 = 0
(2)ε2– i2r2–ε1– i1r1 = 0
(3)– ε2– (i1 + i2)R + i2r2 = 0
(4)ε1– (i1 + i2)R + i1r1 = 0
305.
On interchanging the resistances, the balance point of a meter bridge shifts to the left by 10 cm. The resistance of their series combination is 1KΩ. How much was the resistance on the left slot before interchanging the resistances?
(1)550
(2)910
(3)990
(4)505
306.
Two bars of equal resistivity ρ and radii 'r' and '2r' are kept in contact as shown. An electric current I is passed through the bars. Which one of the following is correct
(1)Heat produced in bar (a) is 2 times the heat produced in bar (b)
(2)Electric field in both halves is equal
(3)Current density across AB is double that across BC.
(4)Potential difference across BC is 4 times that across AB.
307.
In the given potentiometer circuit arrangement, the balancing length AC is measured to be 250 cm. When the galvanometer connection is shifted from point (1) to point (2) in the given diagram, the balancing length becomes 400 cm. The ratio of the emf of two cells, ϵϵ1 is
(1)35
(2)58
(3)34
(4)23
308.
An ideal battery of 4 V and resistance R are connected in series in the primary circuit of a potentiometer of length 1m and resistance 5Ω. The value of R, to give a potential difference of 5mV across 10cm of potentiometer wire is:
(1)490Ω
(2)480Ω
(3)395Ω
(4)495Ω
309.
In the circuit shown the cells A and B have negligible resistances. For VA = 12V, R1 = 500Ω and R = 100Ω the galvanometer (G) shows no deflection. The value of VB is:
(1)4V
(2)2V
(3)12V
(4)6V
310.
The resistance in following circuit are R1=R2=R3=6.0Ω. The emf of the battery is 12V. When switch S is closed, the potential across resistance R1 is changed by an amount.
(1)−2V
(2)+2V
(3)−4V
(4)+4V
311.
The net resistance of the circuit between A and B is
(1)38Ω
(2)314Ω
(3)316Ω
(4)322Ω
312.
Two metal wires of identical dimension are connected in series. If σ1 and σ2 are the conductivities of the metal wires respectively, the effective conductivity of the combination is:
(1)2σ1σ2σ1+σ2
(2)σ1σ2σ1+σ2
(3)σ1+σ2σ1σ2
(4)σ1+σ22σ1σ2
313.
A wire of resistance R is bent into an equilateral triangle and an identical wire is bent into a square. The ratio of resistance between the two end points of an edge of the triangle to that of the square is Options
(1)8/9
(2)27/32
(3)32/27
(4)9/8
314.
In a meter bridge, the wire of length 1m has a non-uniform cross-section such that, the variation dldR of its resistance R with length I is dldR∝l1. Two equal resistances are connected as shown in the figure. The galvanometer has zero deflection when the jockey is at point P What is the length AP ?
(1)0.2m
(2)0.3m
(3)0.25m
(4)0.35m
315.
A wire of uniform resistance λΩ/m is bent into a circle of radius r and another piece of wire with length 2r is connected between points A and B(AOB) as shown in figure. The equivalent resistance between points A and B is ____Ω.
(1)83πλr
(2)3π+166πλr
(3)2πλr
(4)(π+1)2rλ
316.
Determine the charge on the capacitor in the following circuit:
(1)60μC
(2)2μC
(3)10μC
(4)200μC
317.
The meter bridge shown is in balance position with QP=l2l1. If we now interchange the positions of galvanometer and cell, will the bridge work?. If yes, what will be balanced condition?
(1)yes, QP=l2+l1l2−l1
(2)no, no null point
(3)yes, QP=l1l2
(4)yes, QP=l2l1
318.
In the circuit shown in the figure, if the potential at point A is taken to be zero, the potential at point B is
(1)+1V
(2)−1V
(3)+2V
(4)−2V
319.
In the given circuit the cells have zero internal resistance. The currents (in Amperes) passing through resistance R1 and R2 respectively, are:
(1)1,2
(2)2,2
(3)0.5,0
(4)0,1
320.
A wire of length 25 m and cross-sectional area 5mm2 having resistivity of 2×10−6Ωm is bent into a complete circle. The resistance between diametrically opposite points will be
(1)100Ω
(2)2.5Ω
(3)12.5Ω
(4)50Ω
321.
The I−V graphs for two different electrical appliances P and Q are shown in the diagram. If Rp and RQ be the resistances of the devices, then
(1)Rp=R0
(2)Rp>RQ
(3)Rp<RQ
(4)Rp=2RQ
322.
A battery of emf E has an internal resistance ' r '. A variable resistance R is connected to the terminals of the battery. A current I is drawn from the battery. V is the terminal P.D. If R alone is gradually reduced to zero, which of the following best describes I and V?
(1)I approaches zero, V approaches E
(2)I approaches E/r,V approaches zero
(3)I approaches E/r,V approaches E
(4)I approaches infinity, V approaches E
323.
The total length of potentiometer wire AB is 50 cm in the arrangement as shown in figure. If P is the point where the galvanometer shows zero reading then the length AP is ____ cm.
(1)25
(2)30
(3)20
(4)15
324.
Statement-I: In a Meter Bridge experiment, null point for an unknown resistance is measured. Now, the unknown resistance is put inside an enclosure maintained at a higher temperature. The null point can be obtained at the same point as before by decreasing the value of the standard resistance. Statement-II: Resistance of a metal increases with increase in temperature.
(1)Statement -I is True, Statement -II is True; Statement -II is a correct explanation for Statement –I
(2)Statement -I is True, Statement -II is True; Statement -II is NOT a correct explanation for Statement -I
(3)Statement -I is True, Statement -II is False
(4)Statement -I is False, Statement-II is True.
325.
The Wheatstone bridge shown in Fig. here, gets balanced when the carbon resistor used as R1 has the colour code (Orange, Red, Brown). The resistors R2 and R4 are 80Ω and 40Ω, respectively. Assuming that the colour code for the carbon resistorsgives their accurate values, the colour code for the carbon resistor, used as R3, would be:
(1)Brown, Blue, Brown
(2)Brown, Blue, Black
(3)Red, Green, Brown
(4)Grey, Black, Brown
326.
Two cells of internal resistances r1 and r2 and of same emf are connected in series across a resistor of resistance R. If the terminal potential difference across the cell of internal resistance r1 is zero, then the value of R is
(1)R=2(r1+r2)
(2)R=r2−r1
(3)R=r1−r2
(4)R=2(r1−r2)
327.
The resistive network shown below is connected to a D.C. source of 16V. The power consumed by the network is 4 Watt. The value of R is
(1)6Ω
(2)8Ω
(3)1Ω
(4)16Ω
328.
When a metal conductor connected to left gap of a meter bridge is heated, the balancing point
(1)remains unchanged
(2)shifts towards right
(3)shifts to the center
(4)shifts towards left
329.
Consider the following statements regarding the network shown in the figure.
(I) The equivalent resistance of the network between points A and B is independent of value of G. (II) The equivalent resistance of the network between points A and B is 34R. (III) The current through G is zero. Which of the above statements is/are true?
(1)(I) alone
(2)(II) alone
(3)(II) and (III)
(4)(I), (II) and (III)
330.
The galvanometer deflection, when key K1 is closed but K2 is open, equals θ0 (see figure). On closing K2 also and adjusting R2 to 5Ω, the deflection in galvanometer becomes 5θ0. The resistance of the galvanometer is, then, given by [Neglect the internal resistance of battery]: