Back to Electromagnetic Induction

Set 2 of 10 · Questions 31-60 of 274

In the print window choose “Save as PDF”. The file prints without a web address or date line.

Mere Teacher

Mere Teacher · Previous Year Questions

NEET Physics · Electromagnetic Induction · Set 2 (Q31-60)

QR code to mereteacher.com

Scan or visit mereteacher.com for free PYQ practice, timed CBT tests, step-by-step solutions and BroBot AI. Answers and solutions are free with a sign-up.

  1. 31.
    A long solenoid of diameter 0.1 m has turns per metre. At the centre of the solenoid, a coil of 100 turns and radius 0.01 m is placed with its axis coinciding with the solenoid axis. The current in the solenoid reduces at a constant rate to 0 A from 4 A in 0.05 s. If the resistance of the coil is , the total charge flowing through the coil during this time is [NEET 2017]
    1. (1)
    2. (2)
    3. (3)
    4. (4)
  2. 32.
    A metallic conductor of length 1m rotates in a vertical plane parallel to east-west direction about one of its end with angular velocity 5 rad/s. If the horizontal component of earth's magnetic field is 0.2 x T, then emf induced between the two ends of the conductor is:
    1. (1)5V
    2. (2)50V
    3. (3)5mV
    4. (4)50mV
  3. 33.
    In an ac generator, if coil of turns and area is rotated at revolutions per second in a uniform magnetic field , then the motional emf produced is equal to (At , the coil is perpendicular to the field)
    1. (1)
    2. (2)
    3. (3)
    4. (4)
  4. 34.
    Consider and are the currents flowing simultaneously in two nearby coils , respectively. If self inductance of coil mutual inductance of coil 1 with respect to coil 2, then the value of induced emf in coil 1 will be Options
    1. (1)
    2. (2)
    3. (3)
    4. (4)
  5. 35.
    A long solenoid has 1000 turns. When a current of 4A flows through it, the magnetic flux linked with each turn of the solenoid is . The self-inductance of the solenoid is [NEET 2016]
    1. (1)3 H
    2. (2)2 H
    3. (3)1 H
    4. (4)4 H
  6. 36.
    Two identical circular coils and are kept on a horizontal tube side by side without touching each other. If the current in the coil increases with time, in response, the coil
    1. (1)is attracted by
    2. (2)remains stationary
    3. (3)is repelled
    4. (4)rotates.
  7. 37.
    The current in self inductance is to be increased uniformly from 1 amp to 11 amp in 4 milliseconds. The e.m.f. induced in inductor during process is
    1. (1)100 volt
    2. (2)0.4 volt
    3. (3)4.0 volt
    4. (4)440 volt
  8. 38.
    A metallic rod of length held along east-west direction is allowed to fall down freely. Given horizontal component of earth's magnetic field . The emf induced in the rod at an instant after it is released is [Take ]
    1. (1)
    2. (2)
    3. (3)
    4. (4)
  9. 39.
    The total number of turns and cross-section area in a solenoid is fixed. However, its length L is varied by adjusting the separation between windings. The inductance of solenoid will be proportional to:
    1. (1)L
    2. (2)L²
    3. (3)1/L²
    4. (4)1/L
  10. 40.
    A circular disc of radius 0.2 meter is placed in a uniform magnetic field of induction in such a way that its axis makes an angle of with . The magnetic flux linked with the disc is
    1. (1)
    2. (2)
    3. (3)
    4. (4)
  11. 41.
    In a circuit and are connected in series with an alternating voltage source of frequency . The current leads the voltage by . The value of is
    1. (1)
    2. (2)
    3. (3)
    4. (4)
  12. 42.
    A long solenoid has 1500 turns. When a current of 3.5 A flows through it, the magnetic flux linked with each turn of solenoid is weber. The self-inductance of solenoid is
    1. (1)
    2. (2)
    3. (3)
    4. (4)
  13. 43.
    In an A.C. circuit, the current flowing is ampere and the potential difference is volts. The power consumption is equal to
    1. (1)
    2. (2)
    3. (3)
    4. (4)
  14. 44.
    A coil having turns and resistance is connected with a galvanometer of resistance . This combination is moved in time seconds from a magnetic flux Weber to Weber. The induced current in the circuit is
    1. (1)
    2. (2)
    3. (3)
    4. (4)
  15. 45.
    Two conducting circular loops of radii and are placed in the same plane with their centres coinciding. If , the mutual inductance M between them will be directly proportional to [NEET 2021]
    1. (1)
    2. (2)
    3. (3)
    4. (4)
  16. 46.
    A 220-volt input is supplied to a transformer. The output circuit draws a current of 2.0 ampere at 440 volts. If the efficiency of the transformer is 80%, the current drawn by the primary windings of the transformer is
    1. (1)3.6 ampere
    2. (2)2.8 ampere
    3. (3)2.5 ampere
    4. (4)5.0 ampere
  17. 47.
    In which of the following devices, the eddy current effect is not used? [NEET 2019]
    1. (1)Magnetic braking in train
    2. (2)Electromagnet
    3. (3)Electric heater
    4. (4)Induction furnace
  18. 48.
    The total emf induced in a closely would coil of turns in which the magnetic flux linked with the coil changing at the rate is
    1. (1)
    2. (2)
    3. (3)
    4. (4)
  19. 49.
    Two similar circular loops carry equal currents in the same direction. On moving the coils further apart, the electric current will
    1. (1)remain unaltered
    2. (2)increases in one and decreases in the second
    3. (3)increase in both
    4. (4)decrease in both
  20. 50.
    The magnitude of the induced emf in a coil of inductance in which the current changes from to in is
    1. (1)
    2. (2)
    3. (3)
    4. (4)
  21. 51.
    The current in a coil changes from to in . The magnitude of emf induced in the coil is . The value of self-inductance of the coil is
    1. (1)
    2. (2)
    3. (3)
    4. (4)
  22. 52.
    A wire loop of area has a resistance of . A magnetic field pointing normal to the loop has a magnitude of and is reduced to zero at a uniform rate in . What is induced emf and resulting current?
    1. (1)
    2. (2)
    3. (3)
    4. (4)
  23. 53.
    A boat is moving due east in a region where the earth's magnetic field is 5.0 × due north and horizontal. The boat carries a vertical aerial 2m long. If the speed of the boat is 1.50 , the magnitude of the induced emf in the wire of aerial is:
    1. (1)1 mV
    2. (2)0.75 mV
    3. (3)0.50 mV
    4. (4)0.15 mV
  24. 54.
    A metal ring is held horizontally and bar magnet is dropped through the ring with its length along the axis of the ring. The acceleration of the falling magnet is
    1. (1)more than
    2. (2)equal to
    3. (3)less than
    4. (4)either (a) or (c)
  25. 55.
    Direction of current induced in a wire moving in a magnetic field is found using
    1. (1)Fleming's left hand rule
    2. (2)Fleming's right hand rule
    3. (3)Ampere's rule
    4. (4)Right hand clasp rule.
  26. 56.
    A condenser of capacity C is charged to a potential difference of . The plates of the condenser are then connected to an ideal inductor of inductance L. The current through the inductor when the potential difference across the condenser reduces to is
    1. (1)
    2. (2)
    3. (3)
    4. (4)
  27. 57.
    A coil of resistance 400Ω is placed in a magnetic field. If the magnetic flux φ (wb) linked with the coil varies with time t (sec) as φ = + 4. The current in the coil at t = 2 sec is:
    1. (1)0.5A
    2. (2)0.1 A
    3. (3)2 A
    4. (4)1 A
  28. 58.
    A long solenoid with 40 turns per em carries a current of . The magnetic energy stored per unit volume is .
    1. (1)
    2. (2)
    3. (3)
    4. (4)
  29. 59.
    In an electrical circuit and ac voltage source are all connected in series. When is removed from the circuit, the phase difference between the voltage and the current in the circuit is . If instead, is removed from the circuit, the phase difference is again . The power factor of the circuit is
    1. (1)
    2. (2)
    3. (3)1
    4. (4)
  30. 60.
    The primary of a transformer when connected to a dc battery of 10 volt draws a current of 1 . The number of turns ofthe primary and secondary windings are50 and 100 respectively. The voltage in thesecondary and the current drawn by the circuit in the secondary are respectively
    1. (1)20V and
    2. (2) and 0.5mA
    3. (3)
    4. (4) and