In the print window choose “Save as PDF”. The file prints without a web address or date line.
Mere Teacher · Previous Year Questions
NEET Physics · Fluid Mechanics · Set 1 (Q1-30)
Scan or visit mereteacher.com for free PYQ practice, timed CBT tests, step-by-step solutions and BroBot AI. Answers and solutions are free with a sign-up.
1.
The gauge pressure at a depth of 50m in a sea is (Density of sea water is 1025kgm−3 and g=10ms−2 )
(1)1025Pa
(2)512500Pa
(3)20000Pa
(4)15000Pa
2.
A small sphere of radius r falls from rest in a viscous liquid. As a result, heat is produced due to viscous force. The rate of production of heat when the sphere attains its terminal velocity, is proportional to [NEET 2018]
(1)r5
(2)r2
(3)r3
(4)r4
3.
An ideal fluid flows (laminar flow) through a pipe of non-uniform diameter. The maximum and minimum diameters of the pipes are 6.4cm and 4.8cm, respectively. The ratio of the minimum and the maximum velocities of fluid in this pipe is:
(1)25681
(2)169
(3)43
(4)163
4.
What is the terminal velocity of a rain drop of radius 0.02mm ? [Note that the coefficient of viscosity of air is 1.8×10−5N/m2, density of water is 1000kg/m3. Use g=10m / s2 and density of air can be neglected in comparison with density of water]
(1)4.9cm/s
(2)9.8cm/s
(3)0.49cm/s
(4)49cm/s
5.
If 1000 droplets of water of surface tension 0.07 N/m. having same radius 1 mm each, combine to from a single drop. In the process the released surface energy is- (Take π=722)
(1)7.92x10−6J
(2)7.92x10−4J
(3)9.68x10−4J
(4)8.8x10−5J
6.
The value of tension in a long thin metal wire has been changed from T1 to T2. The lengths of the metal wire at two different values of tension T1 and T1 are l1and l2 respectively. The actual length of the metal wire is:
(1)T1−T2T1l2−T2l1
(2)T1−T2T1l1−T2l2
(3)2l1+l2
(4)T1T2l1l2
7.
A small liquid drop of radius R is divided into 27 identical liquid drops. If the surface tension is T, then the work done in the process will be:
(1)8πR2T
(2)3πR2T
(3)18πR2T
(4)4πR2T
8.
A sphere of relative density σ and diameter D has concentric cavity of diameter d. The ratio of dD, if it just floats on water in a tank is:
(1)(σ+2σ−2)1/3
(2)(σ−1σ)1/3
(3)(σσ−1)1/3
(4)(σ−1σ+1)1/3
9.
A tank of oil has height of 4m and density of 850kgm−3. The gauge pressure at the bottom of the tank is (1atm=105Pa), Acceleration due to gravity =10ms−2 )
(1)34kPa
(2)384kPa
(3)284kPa
(4)200kPa
10.
A small hole of area of cross-section 2mm2 is present near the bottom of a fully filled open tank of height 2 m. Taking g=10m/s2, the rate of flow of water through the open hole would be nearly [NEET 2019]
(1)8.9×10−6m3/s
(2)2.23×10−6m3/s
(3)6.4×10−6m3/s
(4)12.6×10−6m3/s
11.
A 400 g solid cube having an edge of length 10 cm floats in water. How much volume of the cube is outside the water? (Given: density of water =1000kgm−3 )
(1)1400cm3
(2)600cm3
(3)4000cm3
(4)400cm3
12.
A bullet of mass5g, travelling with a speed of 210m/s, strikes a fixed wooden target. One half of its kinetic energy is converted into heat in the bullet while the other half is converted into heat in the wood. The rise of temperature of the bullet if the specific heat of its material is 0.030cal/(g−°C)(1cal=4.2×107 ergs) close to
(1)83.3∘C
(2)87.5∘C
(3)38.4∘C
(4)119.2∘C
13.
A spherical body of radius r and density σ falls freely through a viscous liquid having density ρ and viscosity η and attains a terminal velocity v0. Estimated maximum error in the quantity η is : (Ignore errors associated with σ,ρ and g, gravitational acceleration)
(1)r2Δr+voΔvo
(2)2rΔr−voΔvo
(3)2(rΔr−voΔvo)
(4)2(rΔr+voΔvo)
14.
The pressure at the bottom of a liquid tank is not proportional to the
(1)acceleration due to gravity
(2)density of the liquid
(3)height of the liquid
(4)area of the liquid surface
15.
A meniscus drop of radius 1cm is sprayed into 106 droplets of equal size. Calculate the energy expended if surface tension of mercury is 435×10−3N/m.
(1)54.1×10−3J
(2)64.1×10−3J
(3)74.1×10−3J
(4)84.1×10−3J
16.
Three liquids of densities ρ1, ρ2 and ρ3 (with ρ1 > ρ2 > ρ3), having the same value of surface tension T, rise to the same height in three identical capillaries. The angles of contact θ1, θ2 and θ3 obey
(1)π > θ1 > θ2 > θ3 < 2π
(2)2π> θ1 > θ2 > θ3 ≥ 0
(3)0 ≤ θ1 < θ2 < θ3 < 2π
(4)2π< θ1 > θ2 > θ3 < π
17.
The cylindrical tube of a spray pump has radius R, one end of which has n fine holes, each of radius r. If the speed of the liquid in the tube is v, the speed of the ejection of the liquid through the holes is
(1)n2r2vR2
(2)nr2vR2
(3)n3r2vR2
(4)nrv2R
18.
A thin flat circular disc of radius 4.5 cm is placed gently over the surface of water. If surface tension of water is 0.07N/m, then the excess force required to take it away from the surface is [NEET 2024]
(1)19.8 mN
(2)198 mN
(3)1.98 mN
(4)99 mN
19.
A large number of water drops, each of radius r, combine to have a drop of radius R. If the surface tension is T and mechanical equivalent of heat is J, the rise in heat energy per unit volume will be:
(1)rJ2T
(2)rJ3T
(3)J2T(r1−R1)
(4)J3T(r1−R1)
20.
A horizontal pipeline carrying gasoline has a cross sectional diameter of 5mm. If the viscosity and density of the gasoline are 6×10−3 Poise and 720kg/m3 respectively, the velocity after which the flow becomes turbulent is
(1)>1.66m/s
(2)>3.33m/s
(3)>1.6×10−3m/s
(4)>0.33m/s
21.
A body of volume V floats on water with 31 of its volume above the surface. The volume of the object above the surface when floating on a liquid of specific gravity 1.5 is
(1)83V
(2)94V
(3)95V
(4)32V
22.
A spherical ball of radius 1×10−4m and density 105kg/m3 falls freely under gravity through a distance h before entering a tank of water, If after entering in water the velocity of the ball does not change, then the value of h is approximately: (The coefficient of viscosity of water is 9.8×10−6Ns/m2 )
(1)2296 m
(2)2518 m
(3)2249 m
(4)2396 m
23.
In a well pressure at a point 10m below the surface of water is (g=10ms−2)
(1)2×104Nm−2
(2)105Nm−2
(3)104Nm−2
(4)2×105Nm−2
24.
The amount of energy required to form a soap bubble of radius 2 cm from a soap solution is nearly (surface tension of soap solution =0.03Nm−1) [NEET 2023]
(1)5.06×10−4J
(2)3.01×10−4J
(3)50.1×10−4J
(4)30.16×10−4J
25.
A soap bubble, having radius of 1 mm, is blown from a detergent solution having a surface tension of 2.5×10−2N/m. The pressure inside the bubble equals at a point Z0 below the free surface of water in a container. Taking g=10m/s2, density of water =103kg/m3, the value of Z0 is [NEET 2019]
(1)10 cm
(2)1 cm
(3)0.5 cm
(4)100 cm
26.
Water is flowing through a horizontal pipe in streamline flow. At the narrowest part of the pipe
(1)velocity is max and pressure is min
(2)pressure is max and velocity is min
(3)both pressure and velocity are max
(4)both velocity an pressure are min
27.
A raindrop with radius R=0.2mm falls from a cloud at a height h=2000m above the ground. Assume that the drop is spherical throughout its fall and the force of buoyance may be neglected, then the terminal speed attained by the raindrop is: [Density of waterfw=1000kgm−3 and Density of air fa=1.2kgm−3,g=10m/s2Coefficient of viscosity of air 1.8×10−5Nsm−2]
(1)250.6ms−1
(2)43.56 ms−1
(3)4.94 ms−1
(4)14.4 ms−1
28.
A big drop is formed by coalescing 1000 small droplets of water. The surface energy will become:
(1)100 times
(2)10 times
(3)1001th
(4)101th
29.
A capillary tube of radius r is immersed in water and water rises in it to a height h. The mass of the water in the capillary tube is 5 g. Another capillary tube of radius 2r is immersed in water. The mass of water that will rise in this tube is [NEET 2020]
(1)5.0 g
(2)10.0 g
(3)20.0 g
(4)2.5 g
30.
Assume that a drop of liquid evaporates by decrease in its surface energy, so that its temperature remains unchanged. What should be the minimum radius of the drop for this to be possible? The surface tension is T, density of liquid is ρ and L is its latent heat of vaporization.