121.Which process use in smelting during metallurgy of coper- (1)Self reduction of copper
- (2)Cu2S is converted into Cu2O
- (3)FeS convert into FeO
- (4)Reduction of Fe
122.Which one of the following reactions does not occur during extraction of copper ?- (1)2Cu2S + 3O2 → 2Cu2O + 2SO2
- (2)2FeS + 3O2 → 2FeO + 2SO2
- (3)CaO + SiO2 → CaSiO3
- (4)FeO + SiO2 → FeSiO3
123.Which of the following reaction is an example of calcination process ?- (1)2Ag + 2HCl + [O] 2AgCl + H2O
- (2)2Zn + O2 2ZnO
- (3)2ZnS + 3O2 2ZnO + 2SO2
- (4)MgCO3 MgO + CO2
124.The correct statement regarding the given Ellingham diagram is: [JEE(Main)2019 Online (09-01-19), 4/120]- (1)At 1400ºC, Al can be used for the extraction of Zn from ZnO
- (2)Coke cannot be used for the extraction of Cu from Cu2O
- (3)At 800ºC, Cu can be used for the extraction of Zn from ZnO
- (4)At 500ºC, coke can be used for the extraction of Zn from ZnO
125.The point of intersection and sudden increase in the slope, in the diagram given below, respectively, indicates:- (1)ΔG=0and melting or boiling point of the metal oxide
- (2)ΔG>0and decomposition of the metal oxide
- (3)ΔG<0and decomposition of the metal oxide
- (4)ΔG=0and reduction of the metal oxide
126.Match List - I with List - II:
Choose the most appropriate answer from the options given below :- (1)(a)-(iii), (b)-(iv), (c)-(ii), (d)-(i)
- (2)(a)-(iii), (b)-(iv), (c)-(i), (d)-(ii)
- (3)(a)-(iv), (b)-(iii), (c)-(i), (d)-(ii)
- (4)(a)-(iii), (b)-(ii), (c)-(iv), (d)-(i)
127.The correct statement regarding the given Ellingham diagram is :- (1)At 1400ºC, Al can be used for the extraction of Zn from ZnO
- (2)Coke cannot be used for the extraction of Cu from Cu2O
- (3)At 800ºC, Cu can be used for the extraction of Zn from ZnO
- (4)At 500ºC, coke can be used for the extraction of Zn from ZnO
128.Extraction of gold and silver involves leaching with CN− ion. Silver is later recovered by- (1)distillation
- (2)zone refining
- (3)displacement with Zn
- (4)liquation(NEET2017)
129.Native silver metal forms a water soluble complex with a dilute aqueous solution of NaCN in the presence of:- (1)nitrogen
- (2)oxygen
- (3)carbon dioxide
- (4)argon
130.In the leaching of alumina from bauxite, the ore expected to leach out in the process by reacting with NaOH is :- (1)\mathrm{TiO}_{2}
- (2)Fe2O3
- (3)ZnO
- (4)SiO2
131.Observe the following Ellingham diagram, and identify the incorrect statement regarding it- (1)At point ' A ' for the reduction of Al2O3 by Mg, ΔG∘=0
- (2)Below 1673 K,Mg can reduce Al2O3 to Al
- (3)Below 1673K,Al can reduce MgO to Mg
- (4)Above 1673K,Al can reduce MgO to Mg
132.Among statements (a) - (d), the correct ones are (A) lime stone is decomposed to CaO during the extraction of iron from its oxides. (B) In the extraction of silver, silver is extracted as an anionic complex. (C) Nickel is purified by Mond's process. (D) Zr and Ti are purified by Van Arkel method- (1)(a),(c) and (d) only
- (2)(a) and (d) only
- (3)(b),(c) and (d) only
- (4)(a),(b),(c) and (d)
133.Which of the following statements is not correct? 1.Reduction of alumina to give aluminium by magnesium is thermodynamically feasible. 2.The point of intersection of AlO3 and MgO curves in Ellingham diagram is below 1665K. 3.Use of magnesium as reducing agent in metallurgy of aluminium is economical. 4.Ellingham diagram represents the graphical plot of Gibbs energy vs temperature for the formation of the oxides of common metals and reducing agents.- (1)1
- (2)2
- (3)3
- (4)4
134.The incorrect statement is- (1)bronze is an alloy of copper and tin
- (2)cast iron is used to manufacture wrought iron
- (3)German silver is an alloy of zinc, copper and nickel
- (4)brass is an alloy of copper and nickel
135.Copper matte is composed of …………..- (1)Cu2S and Cu2O
- (2)Cu2S and FeS
- (3)CuFeS2 and Cu2S
- (4)CuS and FeS
136.Hall-Heroult's process is given by:- (1)Cu2+(aq)+H2(g)→Cu(s)+2H+(aq)
- (2)Cr2O3+2Al→Al2O3+2Cr
- (3)2Al2O3+3C→4Al+3CO2
- (4)ZnO+C⟶Coke,1673KZn+CO
137.The composition of 'copper matte' is- (1)Cu2S+FeS
- (2)Cu2S+Cu2O
- (3)Cu2S+FeO
- (4)Cu2O+FeS
138.The statement that is not correct is- (1)a furnace lined with haematite is used to convert cast iron to wrought iron.
- (2)collectors enhance the wettability of mineral particles during froth flotation.
- (3)in vapour phase refining, metal should form a volatile compound.
- (4)copper from its low grade ores is extracted by hydrometallurgy.
139.Calcium is obtained by- (1)reduction of calcium chloride with carbon
- (2)electrolysis of molten anhydrous calcium chloride
- (3)roasting of limestone
- (4)electrolysis of solution of calcium chloride in H2O. (1997)
140.Identify the ore not containing iron.- (1)Limonite
- (2)Siderite
- (3)Carnallite
- (4)Chalcopyrites
141.Which of the following statements are correct related to metallurgy? (A) In electrolytic refining of copper, pure Cu is used as anode.(B) Zone refining is based on the principle that impurities are more soluble in the melt than in the solid state of the metal.(C) TiI4 upon heating will give pure Ti.(D) Very pure Zr may be obtained by galvanisation.(E) In copper smelting, hot air is used to convert to CuSO4. The correct answer is- (1)(A), (B), (E)
- (2)(B),(C)
- (3)(B),(C), (D), (E)
- (4)(B),(C), (D)
142.The correct statement is :- (1)leaching of bauxite using concentrated NaOHsolutiongives sodium aluminate and sodium silicate.
- (2)the Hall-Heroult process is used for the production ofaluminium and iron.
- (3)pig iron is obtained from cast iron.
- (4)the blistered appearance of copper during the metallur-gical process is due to the evolution of CO2.
143.Ellingham diagram represents a graph of- (1)ΔG vs P
- (2)ΔSvsP
- (3)ΔG∘ vs T
- (4)ΔG vs T
144.Cryolite is :- (1)Na3AlF6 and is used in the electrolysis of alumina for decreasing electrical conductivity.
- (2)Na3AlF6 and is used in the electrolysis of alumina for lowering the melting point of alumina.
- (3)Na3AlF6 and is used in the electrolytic purification of alumina.
- (4)Na3AlF6 and is used in the electrolysis of alumina.
145.Oxidation state of copper is +1 in- (1)malachite
- (2)cuprite
- (3)azurite
- (4)none of the above
146.The one that is not a carbonate ore is:- (1)malachite
- (2)calamine
- (3)siderite
- (4)bauxite
147.In the electrolytic refining of zinc,- (1)graphite is at the anode
- (2)the impure metal is at the cathode
- (3)the metal ion gets reduced at the anode
- (4)acidified zinc sulphate is the electrolyte.
148.The correct statement is:- (1)aniline is a froth stabilizer.
- (2)zincite is a carbonate ore
- (3)sodium cyanide cannot be used in the metallurgy of silver.
- (4)zone refining process is used for the refining of titanium.
149.Aluminium is extracted from alumina (Al2O3) by electrolysis of a molten mixture of :- (1)Al2O3 + HF + NaAlF4
- (2)Al2O3 + CaF2 + NaAlF4
- (3)Al2O3 + Na3AlF6 + CaF2
- (4)Al2O3 + KF + Na3AlF6
150.In the extraction of copper from its sulphide ore, metal is finally obtained by the oxidation of cuprous sulphide with :- (1)SO2
- (2)Fe2O3
- (3)Cu2O
- (4)CO
|